Exercise 9.8. Which of the listed below statements are true/false. Specify your answer using the text

1) There are still not so many users of the Internet.

2) There is information on all sorts of topics on the Internet, including education and weather forecasts.

3) People can communicate through e-mail and chat programs only.

4) Internet is tens of thousands of networks which exchange the information in the same basic way.

5) You can access information available on the World Wide Web through the Web browser.

6) You need a computer (hardware) and a special pro­gram (software) to be a WWW user.

7) You move from site to site by clicking on a portion of text only.

8) Every time the user wants to move somewhere on the 'eh he/she needs to step by step enter links and addresses.

9) Films and pictures are not available on the Internet.

10) Radio and TV-broadcasting is a future of Internet. They're not available yet.

Exercise 9.9. Define the following using the vo­cabulary:

1) Internet

2) World Wide Web

3) Web browser

4) Internet provider

5) Hyperlinks

Exercise 9.10. Find the equivalents:

1) Объем ресурсов и услуг, которые являются час­тью WWW, растет чрезвычайно быстро.

2) Каждая ссылка, выбранная вами представляет документ, графическое изображение, видеоклип или аудио файл где-то в Интернет.

3) Интернет может быть также использован для це­лей развлечения.

4) Вы получаете доступ к ресурсам Интернет через интерфейс или инструмент, который называется веб-браузер.

5) Вся эта деятельность возможна благодаря десят­кам тысяч компьютерных сетей, подключенных к Интернет и обменивающихся информацией в одном режиме.

6) Пользователи общаются через электронную по­чту, дискуссионные группы, чэт-каналы (многока­нальный разговор в реальном времени) и другие сред­ства информационного обмена.

Exercise 9.11. Match the following:

1) You access the information through one interface or tool called a...

2) People connected to the WWW through the local... have access to a variety of information.

3) The user doesn't need to know where the site is, the... follows the...

4) In 1996 there were more than 20 million users of the...

5) Each... provides a graphical interface.

6) Local... charge money for their services to access... resources.

Words to match with:

1) web browser, providers, link, WWW,

Questions for group discussion:

1) Some people think that Internet is very harmful, especially for young people, because it carries a lot of information about sex, drugs, violence and terrorism. Do you think that some kind of censorship is necessary on the WWW?

2) World famous authors and publishers say that the Internet violates their copyright because Web-program­mers put all kinds of books, pictures, music, films and programs free on the Internet and this reduces their sales and profits.

3) Has anyone in your group experience working on the Internet? Ask them 1) about the difficulties they had; 2) useful information retrieved; 3) fun they got? Why so few people have experience working on the Internet?

FAMOUS PEOPLE OF SCIENCE AND ENGINEERING

Bill Gates

WilliamHenry Gates was born in Seattle, Washing­ton, in 1955.

He is an American business executive, chairman and chief executive officer of the Microsoft Corporation. Gates was the founder of Microsoft in 1975 together with Paul Alien, his partner in computer language de­velopment. While attending Harvard in 1975, Gates together with Alien developed a version of the BASIC computer programming language for the first personal computer.

In the early 1980s. Gates led Microsoft's evolution from the developer of computer programming languages to a large computer software company. This transition began with the introduction of MS-DOS, the operating system for the new IBM Personal Computer in 1981. Gates also led Microsoft towards the introduction of application software such as the Microsoft Word proces­sor.

Much of Gates' success is based on his ability to trans­late technical visions into market strategy. Although Gates has accumulated great wealth from his holdings of Microsoft stock, he has been known as a tough competitor who seems to value winning in a competitive en­vironment over money. Gates still continues to work per­sonally in product development at Microsoft.

ALLOYS

Bronze and brass, the first alloys in the history of metallurgy, were probably obtained by man accidentally when melting mixed metal ores. Much later alloys of iron were obtained.

Steel was made in small quantities in early times un­til the mid-19th century when it was manufactured on a large scale in the iron and steel industry.

The commercial production of pure aluminium in about 1890 began a new range of alloys and among them duralumin, an alloy of about 94 per cent aluminium, with small quantities of copper, manganese, magnesium, and silicon. Most of aluminium alloys are both light and strong.

Nickel is often mixed with other metals for special purposes: permalloy is a nickel-iron alloy that is mag­netically soft. The polarity of its magnetic field can be easily changed and it is used for transformer cores. Monel metals contain about two parts nickel to one part cop­per, plus other elements. They are stronger than nickel and extremely corrosion-resistant. These properties make them useful in chemical production.

Electrum is a natural or artificial alloy of gold and sil­ver containing 15-45 per cent of silver. It was used in the ancient world for coinage.

Bismuth is frequently used as a part of alloys with low melting-points. Today alloys can be designed for particu­lar applications with certain properties.

 


MANUFACTURING OF PLASTICS

The manufacture of plastic and plastic products in­volves procuring the raw materials, synthesizing the basic polymer, compounding the polymer into a material useful for fabrication, and moulding or shaping the plas­tic into its final form.

Raw Materials

Originally, most plastics were made from resins de­rived from vegetable matter, such as cellulose (from cot­ton), oils (from seeds), starch derivatives, or coal. Ca­sein (from milk) was among the nonvegetable materials used. Although the production of nylon was originally based on coal, air, and water, and nylon 11 is still based on oil from castor beans, most plastics today are derived from petrochemicals. These oil-based raw materials are relatively widely available and inexpensive. However, because the world supply of oil is limited, other sources of raw materials, such as coal gasification, are being ex­plored.

Synthesizing the Polymer

The first stage in manufacturing plastic is polymeri­zation. As noted, the two basic polymerization methods are condensation and addition reactions. These methods may be carried out in various ways. In bulk polymeriza­tion, the pure monomer alone is polymerized, generally either in the gaseous or liquid phase, although a few solid-state polymerizations are also used. In solution polymerization, an emulsion is formed and then coagulated. In interfacial polymerization, the monomers are dissolved in two immiscible liquids, and the polymerization occurs at the interface of the two liquids.

Additives

Chemical additives are often used in plastics to pro­duce some desired characteristic. For instance, antioxidants protect a polymer from chemical degradation by oxygen or ozone; similarly, ultraviolet stabilizers pro­tect against weathering. Plasticizers make a polymer more flexible, lubricants reduce problems with friction, and pigments add colour. Among other additives are flame retardants and antistatics.

Many plastics are manufactured as composites. This involves a system where reinforcing material (usually fibres made of glass or carbon) is added to a plastic resin matrix. Composites have strength and stability compa­rable to that of metals but generally with less weight. Plastic foams, which are composites of plastic and gas, offer bulk with low weight.

Shaping and Finishing

The techniques used for shaping and finishing plas­tics depend on three factors: time, temperature, and flow (also known as deformation). Many of the processes are cyclic in nature, although some fall into the categories of continuous or semicontinuous operation.

One of the most widely used operations is that of ex­trusion. An extruder is a device that pumps a plastic through a desired die or shape. Extrusion products, such as pipes, have a regularly shaped cross section. The ex­truder itself also serves as the means to carry out other operations, such as blow moulding and injection moulding. In extrusion blow moulding, the extruder fills the mould with a tube, which is then cut off and clamped to form a hollow shape called a parison. The hot, molten parison is then blown like a balloon and forced against the walls of the mould to form the desired shape. In injection moulding, one or more extruders are used with recipro­cating screws that move forwards to inject the melt and then retract to take on new molten material to continue the process. In injection blow moulding, which is used in making bottles for carbonated drinks, the parison is first injection moulded and then reheated and blown.

In compression moulding, pressure forces the plastic into a given shape. Another process, transfer moulding, is a hybrid of injection and compression moulding: the molten plastic is forced by a ram into a mould. Other fin­ishing processes include calendering, in which plastic sheets are formed, and sheet forming, in which the plas­tic sheets are formed into a desired shape. Some plastics, particularly those with very high temperature resist­ance, require special fabrication procedures. For exam­ple, polytetrafluoroethene (Teflon) has such a high melt viscosity that it is first pressed into shape and then sintered—exposed to extremely high temperatures that bond it into a cohesive mass without melting it. Some polyamides are produced by a similar process.

Uses

Plastics have an ever-widening range of uses in both the industrial and consumer sectors.

Packaging

The packaging industry is a leading user of plastics. Much LDPE (low-density polyethene) is marketed in rolls of clear-plastic wrap. High-density polyethene (HPDE) is used for some thicker plastic films, such as those used for plastic waste bags and containers. Other packaging plastics include polypropene, polystyrene, polyvinyl chloride (PVC), and polyvinylidene chloride. Polyvinylidene chloride is used primarily for its barrier properties, which can keep gases such as oxygen from passing into or out of a package. Similarly, polypropene is an effective barrier against water vapour. Polypropene is also often used in housewares and as a fibre for carpet­ing and rope.

Construction

The building industry is a major consumer of plastics, including many of the packaging plastics mentioned above. HDPE is used for pipes, as is PVC. PVC is also used in sheets for building materials and similar items. Many plastics are used to insulate cables and wires, and poly­styrene in the form of foam serves as insulation for walls, roofs, and other areas. Other plastic products are roof­ing, door and window frames, mouldings, and hardware.

Other Uses

Many other industries, especially motor manufactur­ing, also depend on plastics. Tough engineering plastics are found in vehicle components like fuel lines, fuel pumps, and electronic devices. Plastics are also used for interior panelling, seats, and trim. Many car bodies are made of fibreglass-reinforced plastic.

Among the other uses of plastic are housings for busi­ness machines, electronic devices, small appliances, and tools. Consumer goods range from sports equipment to luggage and toys