Match the words with their definitions

dissipate to be helpful for a purpose.

expedient degree of slope.

gradient disperse, go away.

integrate thickness of material spread over a surface.

diffuse part cut off, slice.

layer combine into a whole.

section send out in all directions mix.

 

Form nouns from the verbs below.

perform, inform, depend, operate, invent, analyze, begin, elaborate, resist, build, diffuse, serve, reduce, vary, discover.

Make up sentences with these expressions.

due to hardly ever

neither … nor either ... or

because of provided that

so that in order to

 

 

UNIT 4

Read and translate the text, reproduce it orally.

A hybrid microcircuit consists of film passive elements deposited on a glass or ceramic substrate and active elements such as discrete semiconductor devices mounted on the same substrate. Hybrid IC technology thus takes advantage of both film and monolithic IC technology.

The formation of a film passive circuitry on the substrate involves a few steps. First, stripes of silver, aluminum, or gold are grown by evaporation, or deposited by any other method through the windows in a mask. Next, another mask is used to deposit resistors in the form of film stripes of tantalum, chromium, or special alloys. Changing both the material for film deposition and the thickness of the film gives various values of the resistors. A capacitor is made by depositing a metal layer through a special mask, then an oxide layer through another mask, and, finally, a second metal layer on the top of the oxide.

After the passive circuitry is complete, active devices such as transistors and diodes are mounted and bonded to the substrate. Discrete components must be comparable in size to thin-film elements, therefore hybrid circuits use either active devices of adequately decreased dimensions or unpackaged (uncased) devices. Contact between active parts and passive elements can be made by one of the known methods such as thermocompression, ultrasonic and laser welding; the aim is to bond the lead wires of the active elements to contact lands on the subcircuits come in a variety of design versions, the planar type being most popular. Assembled circuits are protected against external influences by encapsulating them into metallic or ceramic cases with lead-out pins.

What distinguishes film hybrid technology is its high flexibility; namely, it affords a wide choice of materials and techniques for the fabrication of film elements and makes available comparatively easy approaches both to design and produce most circuits in the hybrid version.

The process of manufacturing hybrid ICs includes several basic stages; preparation of substrates and photomasks; deposition of film pas- sive elements and interconnections; trimming of resistors; attachment of uncased active elements on the substrate; encapsulation; and testing.

 

Exercises

1. Give synonyms to:

device, contain, desire, involve, various, mount, bond, aim, type, assemble, protect, choice, manufacture.

 

2. Give antonyms to:

necessary, special, top, complete, external, popular, include, easy, most, connect.

 

Match the words with their definitions.

deposit dehydration.

evaporation part.

weld lay, place, put.

component join the pieces by fusing.

alloy gather together, collect.

assemble construct.

fabricate mixture of metals.

 

Form adjectives from the following nouns.

 

commerce, finance, responsibility, addition, religion, comparison, electricity, usage, function.

 

Make up sentences with these expressions.

both … and so that

such as made of

protect against take advantage of

make available

 

UNIT 5

 

Read and translate the text, reproduce it orally.

A silicon wafer can contain several hundred integrated circuits. Before proceeding with assembling, the wafer need be cut vertically and horizontally with a diamond scribe to separate it into individual chips. This operation is known as dicing, or scribing. After sorting out the chips, the assembly proper follows. For this, it is first necessary to mount the chip on a header then bond or solder it to connect the circuit to the header terminals and, finally, encapsulate or package the mounted chip to protect it against mechanical and environmental influences.

Typical encapsulations for integrated circuits are hermetically-sealed metal envelops, epoxy resin coats and other plastic enclosures, and ceramic and metal-ceramic packages. Ceramic and metal-ceramic packages are commonly meant for IC designed to operate in adverse mechanical and environmental conditions. A metal-ceramic enclosure consists of a ceramic header (envelope bottom) and a metal can or cover bonded to the header by welding or soldering; in a ceramic enclosure both the header and the can are made from a ceramic material and bonded together; a plastic package has its can and bottom molded of a plastic material and bonded together by thermocompression. Plastic packages are suitable for ICs intended for work in all but too arduous conditions.

The design of a package is chosen proceeding from service conditions and requirements for equipment dimensions, type of assembly, and tests of the encapsulated ICs.

Packages can be cylindrical and flat in shape, with leads running parallel or normal to the header plane. IC packages can be classified by the overall and mounting dimensions, the number of leads, and the lead pitch.

In mounting a chip on the header, the chip is held with its gold-plated face down and then pressed onto the gold-plated header mounted on a header anvil. A eutectic such as a gold-silicon or gold-germanium alloy that forms under heat provides a good bond on cooling. All electrical connections are then made between the contact pads on the chip and lead out pins of the header using thin gold wire attached by thermocopmpression bonding. This done, a gold-plated kovar can is mounted on the header and hot-welded to form a sealed envelope.

There are other methods of bonding the chip to a header. In wide use is the flip chip method for attachment of active elements provided with ball leads, solder bumps, and beam leads. The method combines the operations of mechanical bonding and electrical connection of the chip to the header. This is essentially a thermocompression bonding method, by which the chip is mounted, face down, onto the heated header and then pressed against it, so that the solder bumps (preliminarily built up on the chip) make contact with the conductor pattern and form soldered joints. Another method of bounding uses a lead frame to attach the chip to its spiderlike lead pattern. The method is rather simple and inexpensive.

Exercises

1. Give synonyms to:

proceed, assemble, separate, dice, solder, finally, environment, commonly, condition, arduous, flat, beam.

2. Give antonyms to:

connect, suitable, arduous, normal, cool, conductor, simple, inexpensive, together, before, first.

3. Match the words with their definitions:

 

preliminary compress, squeeze.

press initiatory, prior.

joint junction, connection.

attach arrange in classes or groups.

encapsulate add, append, fasten.

classify put into a capsule.

suitable right for the purpose or occasion.